N/5/K Cardboard corner 5/5mm
NU/5/P Corner for U5 – U5 profile
NU/5/K Corner for U5 – U5 stacking profile
NU/7/K/S Folding corner for profile U7 – U7
NU/10/5/P/P Corner for profile U10 – U5 right-hand corner
NU/10/5/P/L Corner for profile U10 – U5 left
NU/10/P Corner for profile U10 – U10
NU/10/K Corner for profile U10 – U10 for stacking
NU/10/5/K/P Corner for U10 – U5 profile for stacking right-hand side
NU/10/5/K/L Corner for profile U10 – U5 for stacking left-hand side
NU/10/2K Corner for U10 – U10 double
NH/12 Corner for profile H12
The corner fastener is mounted directly onto the 5 mm board, the snap-fit design means that it does not need to be welded or riveted to the board and the flange allows stacking.
We provide CAD documentation upon customer request.
Used to join PU/5 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and thus stiffens the packaging.
It is also available with the NU/5/K flange for stacking.
We provide CAD documentation upon customer request.
Used to join PU/5 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and stiffens the packaging, and the flange used makes it possible to stack cartons.
Also available without flange NU/5/P
We provide CAD documentation upon customer request.
Narożnik do opakowań składanych wykorzystujących profil PU/7
We provide CAD documentation upon customer request.
Used to join PU/10 with PU/5 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and stiffens the packaging, and the flange used makes it possible to stack the cartons. It is available as right-hand NU/10/5/K/P and left-hand NU/10/5/K/L.
It is also available in the version without flange NU/10/5/P/P and NU/10/5/P/L.
We provide CAD documentation upon customer request.
Used to join PU/10 with PU/5 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and stiffens the packaging, and the flange used makes it possible to stack the cartons. It is available as right-hand NU/10/5/K/P and left-hand NU/10/5/K/L.
It is also available in the version without flange NU/10/5/P/P and NU/10/5/P/L.
We provide CAD documentation upon customer request.
Used to join PU/10 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and thus stiffens the packaging.
It is also available in the NU/10/K and NU/10/2K flange versions, which allow stacking.
We provide CAD documentation upon customer request.
Used to join PU/10 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and stiffens the packaging, and the flange used makes it possible to stack cartons.
Also available with double flange NU/10/2/K and without flange NU/10/P.
We provide CAD documentation upon customer request.
Used to join PU/10 profiles to PU/5 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and stiffens the packaging. It is available as right-hand NU/10/5/P/P and left-hand NU/10/5/P/L.
It is also available with the NU/10/5/K/P and NU/10/5/K/L flange to enable stacking.
We provide CAD documentation upon customer request.
Used to join PU/10 profiles to PU/5 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and stiffens the packaging. It is available as right-hand NU/10/5/P/P and left-hand NU/10/5/P/L.
It is also available with the NU/10/5/K/P and NU/10/5/K/L flange to enable stacking.
We provide CAD documentation upon customer request.
Used to join PU/10 profiles in the corners of packages by welding, riveting or screwing.
It reinforces the corner and stiffens the packaging, and the double flange enables the cartons to be stacked more securely.
It is also available with standard flange NU/10/K and without flange NU/10/P.
We provide CAD documentation upon customer request.
Together with special rivets and the PH/12 profile, it forms a patented frame system. Thanks to the solid flange formed, it makes it difficult to dust the inside of the packaging and allows stacking. The frames are manufactured assembled or for self-assembly, which reduces transport costs. The corners are then supplied with rivet holes or, on request, without holes if the customer wishes to use their own assembly method.
We provide CAD documentation upon customer request.
